Cobetter Inline Filter Series provide small volume, easy connection,
and simple design. They have been used in marking & coding printers,
wide format printers, and textile printers. These filters can be used as
printhead filters or inline connection filters to avoid system tube ink
aggregate and to protect the printhead.
316L stainless steel media provide good pressure
endurance, broad chemical compatibility, low initial
differential pressure drop, high flow rate.
A compact form to minimize internal ink volume
and waste. Ideal for situations where space is at
a premium.
Vent on PHF capsule, can drain gas.
| Filter Media | Polypropylene/ 316L Stainless Steel |
| Cage / Core / Endcap | Polypropylene |
| Max. Allowable Pressure | 101PSI / 7bar |
| Max. Allowable Temperature | 50°C / 120°F |
| Removal Rating | 5.0μm / 10.0μm / 18.0μm / 20.0μm 25.0μm / 35.0μm / 50.0μm |
| WLPIF | PHF | |
| Diameter | ¢16mm | ¢22mm |
| Length | 46 mm | 46 mm |
| Inlet/Outlet | 1/8" jaco | 4mm Hose barb |
| Filtration Area | 1.88 cm² | 1.88 cm² |
| Item | WLPIF | PHF | ||
| Diameter | ¢16mm | ¢22mm | ||
| Length | 46 mm | 46 mm | ||
| Inlet/Outlet | 1/8" jaco | 4mm Hose Barb | ||
| Filter Media | Polypropylene/ 316L Stainless Steel | Polypropylene/ 316L Stainless Steel | ||
| Cage / Shell / End Cap | Polypropylene | Polypropylene | ||
| Core | Polypropylene | Polypropylene | ||
| Max. Allowable Pressure | 101PSI / 7bar | 101PSI / 7bar | ||
| Max. Allowable Temperature | 50°C / 120°F | 50°C / 120°F | ||
| Filtration Area | 1.88 cm² | 1.88 cm² |
